Slant-Bed Turning Center
The SL6-II has a 6″ 3-jaw chuck, a maximum turning diameter of 12″, maximum turning length of 13″. This model has a 17 HP spindle motor and a 6,000 RPM spindle. Standard with a 12-station auto turret.
| Weight | 7050 lbs |
|---|---|
| Dimensions | 98.6 × 147.5 × 86.3 in |
| CAPACITY |
|
| X/Z Travels | 7/14 in |
| Swing Over Bed | 15.9 in |
| Swing Over Cross | 9.45 in |
| Max. Turning Diameter | 12.4 in |
| Max. Turning Length | 13.4 in |
| SPINDLE |
|
| Spindle Nose | A2-5 |
| Draw Tube Diameter | 1.77 in |
| Spindle Range | 0-6000 RPM |
| AC Spindle Motor | 17/10 HP |
| Spindle Torque | 83 ft-lbs |
| Tailstock Quill Travel | 3.46 in |
| Tailstock Quill Diameter | 2.28 in |
| Tailstock Quill Taper | MT4 |
| Automatic Turret |
|
| Tool Capacity | 12 |
| Tooling Size | .75 in |
| Boring Bar Capacity | 1.25 in |
| Tool Selection | Bi-Directional |
| MOTION |
|
| Rapid Traverse Rate | 1181 IPM |
| Positioning Accuracy | (+/- 0.0002 in) |
| Repeatability | 0.0002 in |
| Axis Thrust Force | 1851 lb-ft Peak X, 1851 lb-ft Peak Z |
| General Details |
|
| Machine Weight | 7050 lbs |
| Machine Height | 86.3 in |
| Footprint | 126 x 82.2 in Nominal Operating (W x D) |
| Power Required | 13 KVA / 32 Amps |
| Voltage Required | 208-240 Volts / 3 Phase |
